| University | National University of Singapore (NUS) |
| Subject | Fundamentals in Industrial Hygiene |
- Of the following basic methods of controlling airborne contaminants, which would usually be considered the least acceptable
A) Continuous, enforced use of NIOSH-approved respirators
B) General exhaust ventilation
C) Isolation of the area where the contamination is generated
D) Local exhaust ventilation at the point of contaminant generation - Which of the following statements concerning respirator fit testing is true?
A) If a worker has had a quantitative fit test, qualitative fit testing is not needed as long as he or she continues to wear the same respirator.
B) Quantitative fit testing is less reliable than qualitative fit testing because it requires the use of special respirators equipped with sampling probes, rather than the actual respirator to be worn by the worker.
C) Quantitative and qualitative fit testing both require expensive, sophisticated equipment if they are to be performed properly.
D) The NIOSH-recommended approach to fit testing is to use quantitative fit testing during the respirator selection process, followed by periodic qualitative fit testing during actual respirator use. - A respirator is to be used to enter an enclosed space where the concentrations of oxygen and air contaminants are uncertain. Which of the following respirator types offers the minimum acceptable protection for this application?
A) A gas mask equipped with a back-mounted universal Type N canister.
B) A powered air-purifying respirator equipped with combination particle, vapor, and gas-removing cartridges.
C) A self-contained breathing apparatus operated in the demand mode.
D) A self-contained breathing apparatus operated in the pressure-demand mode Choose one of the above options and briefly explain your answer. - An organic vapor respirator has an assigned protection factor of 10. If the concentration of a particular organic vapor outside the respirator is 460 ppm, what is the nominal concentration inside the mask?
A) 46 ppm
B) 450 ppm
C) 470 ppm
D) 4600 ppm - The US EPA has developed Levels of Protections for Chemical Protective Clothing. One ensemble includes a Liquid-splash protective suit, Pressure-demand full-facepiece SCBA, Inner chemical resistant gloves, Chemical resistant safety boots, two-way radio, hard hat. This is an example of what level?
A) A
B) B
C) C
D) D
Buy Custom Answer of This Assessment & Raise Your Grades
Get Help By Expert
Are you willing to pay someone to do my assignment on Fundamentals in Industrial Hygiene then don't worry. At Singapore Assignment Help we have appointed Ph.D. writers from a prestigious university in Singapore. Our specialists work 24*7 hours to offer safety management assignment help so that you secure higher marks in your exam.
Answer
Looking for Plagiarism free Answers for your college/ university Assignments.
Recent Solved Questions
- NCO205 User-Centred Design: Human Factors and Design Thinking Tutor-Marked Assignment-01 Semester July 2025
- ECE200 Supporting Sensory and Motor Development End-of-Course Assessment – July Semester 2025
- 7WBS2007-0901-2025 Human Resource Management Assignment 2 Brief 2025
- Bachelor of Engineering in Electrical and Electronic Engineering Assignment Brief
- MKT373 Strategic Content Management End-of-Course Assessment – July Semester 2025
- HRM335 Leadership Development End-of-Course Assessment – July Semester 2025
- EL1101E The Nature of Language Individual Essay Guidelines Semester 1, AY2025/2026
- The Problem of Poverty Essay – Comparing Differential Association and General Strain Theories
- EMT223 Venue Management in Performing Arts Spaces Tutor-Marked Assignment 02 July 2025 Presentation
- FinTech Individual Assignment: Power Dynamics and Climate Transparency in Digital Carbon Markets
